What is a dog enclosure: how is it different from a booth?

Why does a puppy need an enclosure?

In order for the puppy to quickly get used to his new home, it is recommended to purchase an enclosure for him. This will give the dog a private, limited space in which he will feel safe. The enclosure should contain:

• bowls of food and water;
• bedding on which the animal will rest;
• favorite toys.

What is an aviary

For your information! An enclosure is a puppy’s own room in an apartment, where the owner and other pets do not enter.

Design of a dog enclosure

Before you start designing a dog house, you need to know the basic requirements for its design. Traditionally, dogs are kept in covered enclosures, in which two or three walls are made blank. Open walls are fenced with bars. The size of the enclosure depends on the size of the dog and the number of animals kept in one enclosure. If we are talking about one dog, then the area of ​​the enclosure can vary from 6 m² to 10 m². For small breeds whose height at the withers does not exceed 50 cm, an area of ​​6 m² (2 × 3 m) will be sufficient. For medium-sized dogs, with a height of 50-65 cm, the area increases to 8 m² (2.3 × 3.5 m), and for large dogs, whose height at the withers is more than 65 cm, the enclosure area is 10 m², maintaining the aspect ratio of 2: 3 .

The area of ​​the enclosure for two dogs is calculated based on the rules described above and multiplying the result by 1.5. So, for example, a pair of German Shepherds will require an enclosure with an area of ​​12 m² (8 m² × 1.5).

The structure of a dog enclosure consists of a floor, fence walls, bars, roof, entrance doors, feeder doors and kennels. Despite its apparent simplicity, separate requirements are imposed on each structural element. At the same time, it is important to correctly orient the enclosure to the cardinal points. This is necessary in order to protect it as much as possible from the wind and expose it to intense insolation. It is necessary that the enclosure be disinfected naturally using ultraviolet radiation. And this is only possible with southern, southeastern and southwestern orientation. In addition, with this arrangement, the enclosure will be closed with blank walls from cold northern winds. inside the enclosure , then the dog will quickly fall in love with its place.

Feasibility of purchase

DIY dog enclosure: drawings and dimensions

A playpen or enclosure for a dog is convenient to use for a number of reasons:

• the animal gets used to its new home;
• The puppy is toilet trained. This will protect the apartment from many puddles and wet diapers;
• The dog is sick, so he needs privacy. It is important to protect it from noise, children, and domestic animals;
• keep a small dog, such as a Chihuahua, safe by creating a comfortable zone for it where it cannot harm itself. Indeed, for dwarf breeds, even a fall from the sofa can result in injury;
• protect furniture and wallpaper if the pet is too aggressive and likes to chew table legs or scratches the sofa upholstery;
• create a personal space for a pregnant dog so that everything you need is within walking distance. And after the puppies were born, they did not crawl throughout the apartment.

Note! It is impossible to keep a dog locked up in a limited area for too long and too often. The animal may become embittered, its character will deteriorate, and it will stop listening to its owner.

Construction vacancies

Aviaries

Keeping any domestic or wild animals and birds always requires a responsible approach from people. We are responsible for those we have tamed, and therefore the owners must create all the necessary conditions for the safe and comfortable existence of their pets. This is especially true if animals are bred for research or business on a serious scale - for example, when setting up an area for breeding animals in a fur farm, or when creating a format such as a petting zoo.

First of all, the question arises of how to arrange a place where animals could live in a peaceful and calm environment, and where it would be convenient for the breeder to care for them. The best home option for pets of any size are kennels.

An aviary is a platform or fenced area with houses or cages attached to it, where small animals are kept - dogs, birds, rodents, etc. The enclosure can be open or with a canopy.

There are several serious requirements for the enclosure. Firstly, it must protect the animal from rain, snow and wind, it must be warm in the cold season and cool in the heat. A person who cares for animals must carry out cleaning, re-equipment and feeding work in the enclosure without risk to life.

Enclosures are divided into outdoor and indoor. The size of the enclosure can be small, medium or large - depending on the size of the animal and the availability of free territory. It can be temporary (usually in the form of a fence without decking and roof) or permanent - insulated, with full walls, floor and roof.

The main materials for the construction of permanent enclosures are wood and metal. Wooden and metal dwellings are the most reliable and durable option.

The MDN-Prom company offers services for the production of enclosures of any size and type at reasonable prices. MDN-Prom specialists are able to produce metal structures of any complexity in a short time. The company's factories located in the Kaluga and Bryansk regions use modern technologies.

An enclosure for your pet can be made either of a standard size and type, or according to an individual project. MDN-Prom employees will answer all your questions; The company also provides services for order delivery and installation. All you need to do is tell us in detail about the requirements for the pet’s future home and related wishes.

MDN-Prom specializes in the manufacture of comfortable and high-quality enclosures for dogs, birds, and rodents. But the company is not limited to these types of services, so you can order absolutely any enclosures for animals.

Dog enclosures

Keeping a dog means that the animal will definitely have its own place. For those who live in their own country house with a large plot of land, dog enclosures will be an ideal option for housing animals. It has been proven that dogs living in kennels are less prone to aggression than those forced to live on a chain. This is very important if you have purchased a guard dog. The enclosure also makes it easy to isolate the animal if strangers or children come into the area.

When building an enclosure, not only the size of the area is taken into account, but also the physical characteristics of the dog, its breed and age.

The standard sizes of a dog enclosure are as follows: length – 4 m, height – 2.2 m, width – 2 m. In addition, the enclosure can be ordered depending on the height of the animal:

o 6 sq. m, if the height at the withers is less than 50 cm;

o 8 sq. m, if the height at the withers is from 50 to 65 cm;

o 10 sq. m, if the height at the withers is more than 65 cm.

If the dog has the opportunity to walk around the area a lot at night, then the size of the enclosure may be small. In any case, the dog must move freely around the enclosure and be able to play in it.

One of the conditions for installing an enclosure for a dog is that it must have a booth. In addition, this place should be dry, and the façade of the enclosure should face southeast. Sometimes it is advisable to make the enclosure not a separate structure, but to attach it to other buildings.

In regions with harsh climates, a dog's home requires a special structure of walls and roof to retain heat. If the enclosure is supposed to contain a nursing bitch with puppies, then the conditions in it should be as comfortable as possible.

The enclosure for a dog guarding the territory should be located on a hill facing the house. This will give the animal an overview of the entire area. Ideally, this should be a piece of territory near the gate.

Materials for building a dog house should not pose a danger to the health of the animal. Do not use nails or metal mesh.

It is preferable to make the floor in the enclosure wooden, but it is acceptable to use concrete or asphalt. In this case, you will need to lay wooden boards on top. The floor should be made with a slight slope towards the door (about 2 degrees) to facilitate drainage and cleaning.

Mesh should not be used for walls, as it can stretch, tear and injure the dog. Blind walls can be made from almost any material, but at least one wall must remain uncovered. Metal structural elements must be painted and protected from rust.

For human safety reasons, the enclosure door should open inward and be locked with a secure lock. When installing the feeder, make sure that the height to it from the floor is 20-30 cm. Feeders with a rotating mechanism are very convenient. It is best to make the roof of the enclosure with a slope; corrugated sheeting is most often used here.

Home enclosures are not particularly popular. They are suitable only for small indoor breed dogs and are most often made of fine mesh.

Aviaries for birds

Living quarters for birds are quite diverse - these can be cages, display cages, cages, bird cabinets, and, of course, aviaries.

Birds are very freedom-loving creatures and love space, so bird aviaries are the best option for living in captivity. The bird aviary can be installed indoors - in a room or on a balcony, as well as on a personal plot in the fresh air.

In aviaries, birds will be able to fly a lot and freely; the size of such a house allows them to be kept in flocks. Feathered pets will not be subject to stress, as in small cages, and their ability to reproduce and care for chicks will increase. This method of keeping is well suited for birds with a strong territorial instinct.

Models of bird aviaries can be of different shapes, layouts and sizes. The type of structure depends on the type of bird. For some birds, keeping them in wooden enclosures with fine mesh will be rational. Other species, such as parrots, are more suitable for metal structures with durable rods. Warm-loving birds are kept at home in insulated enclosures.

Most often, bird houses are built in a rectangular shape. For small birds, you can order a multi-sided or corner aviary.

Bird aviaries are divided into indoor and outdoor.

Indoor aviaries are used, respectively, for keeping birds at home. Most often they are installed near a window so that the birds receive enough daylight. But it is necessary to ensure that the birds do not suffer from cold and drafts. In this case, it is better to use artificial lighting. When building an indoor dwelling for birds, part of the room is enclosed with metal mesh walls. The enclosure must have its own floor, even if the height of the enclosure is human height. This type of flooring is easy to replace and prevents rodents from entering. It would be a good idea to add a small vestibule so that the birds cannot fly out when the door opens.

Outdoor aviaries are built not only for keeping poultry, but also in research centers and laboratories. An aviary is set up in an open area or on a balcony. It should receive enough sunlight, and the birds should also be able to sit in the shade. A bird's home must protect its inhabitants from bad weather, so the aviary needs a roof. But in some cases, for example, in the warm summer, you can use an open dwelling.

A good foundation and floor will protect from rats and mice, and a metal mesh (sometimes in two rows) will protect from street cats and dogs. The open side of the enclosure should not be placed under trees where wild birds may be present.

The aviary should become a comfortable home for birds, and also be suitable for humans to observe birds. An important aspect is the interior decoration. It is necessary to properly install perches, nest boxes, trees and branches, and take care of landscaping.

In a good aviary, the birds will feel comfortable and there will be no problems with breeding.

Aviaries for rodents

If you become the owner of rabbits, ferrets, chipmunks, hamsters or chinchillas and want to provide them with the best living conditions, then you will probably need special enclosures for rodents.

Rodents are small in size, they eat little, so they do not require too much living space. However, keeping them in empty aquariums or jars is inhumane. But you can install an aviary directly in an apartment or house, turning it into an unusual decorative element of the interior.

Cages are usually used when there are few pets - one or a couple. For breeding purposes, owners of rodents prefer to build enclosures for them. They can be built from several cells, equipped with a labyrinth with complex passages, or stylized as a fairy-tale house. Outdoor enclosures are no less common; they are usually built on farms and zoos.

Housing for such pets can be of different sizes and shapes, it can perform different functions. An enclosure for rodents can have more than one floor. If there is little space, then it is best to build a two- or three-story dwelling. The main thing here is not to overdo it with the complexity of the layout, because an enclosure with rodents needs constant cleaning and tidying.

Wood, chipboard, and aluminum profiles are used as materials for enclosures. The rods or mesh must be galvanized so that a rodent cannot bite through the metal. Another modern material is plexiglass. For reasons of animal safety, the design should be free of small parts and fasteners.

It is recommended to build an outdoor enclosure using a fine mesh, which will not allow larger insects and predatory animals to penetrate there. Living conditions should be as close to natural as possible.

The floor of a rodent enclosure is usually covered with soil and sawdust (sometimes straw or hay), and the roof is made flat. Houses are installed inside the home where the inhabitants can sleep and hide in bad weather. Feeders for rodents are best attached to the wall.

Also, a lot depends on what kind of rodents will be kept in the enclosure. Some of them need trees with branches and shelves inside the enclosure, others need cozy houses and wheels for running.

A spacious enclosure will undoubtedly improve the quality of life of rodents - they will eat, play and reproduce much more willingly than in a cramped small cage.

If you need help choosing the type of enclosure or you are ready to place an order, we invite you to visit the website mdnvizit.ru. In addition to the production of enclosures, the MDN-Prom company is engaged in the production of scaffolding and towers, pavilions and fences of various types, lifting equipment, canopies and many other metal structures. On the website you can view the products, fill out an order form or get advice. MDN-Prom LLC

Tel. (Multichannel), Tel./Fax +7 (4967) 76-16-59 E-mail

What does a dog playpen look like?

DIY dog house at home

A dog playpen resembles a kennel with comfortable conditions, usually without a roof. There she not only sleeps, but also eats and spends time. Such pet houses can be used in the interior. For example, an enclosure for a Chihuahua located in an apartment can be covered with a tabletop if necessary. Since dwarf dogs are small in size, they therefore require a low playpen. Therefore, it can easily be turned into a comfortable coffee table.

Metal enclosures resemble a cage, but it is easy to fold and put away when not needed. There are also canvas playpens, they weigh little and are easy to clean. In addition, they can be folded and transported, for example, to a summer cottage. Therefore, if you plan to move the cage, you need to think about the possibility of disassembling it.

Metal aviary

Disadvantages of dog kennels

What does a dog get that is always chained and lives in a kennel?

• Lack of space for games and exercises;
• Attachment to one place;
• Injuries from collar and harness.

When getting a dog, you need to provide it with excellent living conditions. But many are of the opinion that a small doghouse, assembled from several pieces of wood, and a leash with a chain or belt is enough for the dog. Deprived of mobility, the dog sits on a leash all day long, unable to properly stretch its legs. At the same time, the owners themselves live in comfortable houses with air conditioning and television, with a large number of spacious rooms and utility rooms. Why does a person deserve good conditions, but a dog does not? Moreover, good enclosures in St. Petersburg are not that expensive.

Design options for apartments

Chihuahua mini: puppies and adult dogs

There are many designs of puppy enclosures used in apartments. They differ in size, modules and materials from which they are made.

Note! It’s good when indoor dog cages can be taken outside. Then it is important that they fold, disassemble and have low weight, which will facilitate transportation.

Collapsible plastic

A plastic enclosure for puppies is the simplest. It is used for small dogs. This is a relatively inexpensive design with a large number of models. You can find different options: from the location of the modules to the colors of the plastic. It is easy to assemble, install and clean. Plastic modules are simply connected to each other to form a cage.

For your information! Often a polyester awning is pulled over the frame. Then you can attach the roof to it. This kind of enclosure for small dogs is convenient to move outside or use as a coffee table when refurbished. The awning usually also has many pockets that allow you to store necessary small items.

Plastic aviary

From chipboard

A chipboard fence for dogs in an apartment has the following characteristics and features:

• suitable for small animals;
• lasts a long time;
• quick and easy to assemble;
• safe for the dog, it won’t be able to pick up a splinter and won’t get hurt.

Note! You can buy such a cage or make it yourself.

Made of wood

Wooden products look the most advantageous, and are also made from the most environmentally friendly material. If the walls are made in the form of a fence, then the dogs will chew them with pleasure. Therefore, you need to carefully ensure that the animal is not injured by wood chips.

Most often, coniferous wood is used to create wooden cages. The main thing is to make sure that it is well polished.

Wooden enclosures can also be used for large dogs.

Made of metal

Metal structures are assembled from several modules consisting of rods. They are strong and durable, easy to care for. It is enough to wipe the metal elements with a damp cloth to make them as good as new. They are easy to disassemble and are designed to be adjustable in width and height. This is especially true as the puppy grows.

Aviaries in Rostov - advantages

Enclosures in Rostov are a small area, which is fenced with mesh or rods and has a roof. There is a booth inside. Many owners are afraid that their pet will be cold or uncomfortable there, but this problem can be solved quite simply - insulation is carried out.

When a pet is moved out of the house into the yard, the owners want it to feel just as good outside. This is why there is a need to buy a dog enclosure. This product has the following advantages:

• Protects the animal from rain, wind, scorching sun rays.
• The dog has the opportunity to constantly breathe fresh air, therefore, it will always remain healthy and vigorous.
• Owners can breathe easier, since cleaning can be done less often.

Tips for choosing

When choosing a home kennel for your pet, you need to take into account that the smaller the dog, the lower the cage it needs:

• for miniature pets and puppies, a playpen with a height of about 50 cm is suitable. For example, an enclosure for a Yorkie should meet exactly these characteristics;
• For a medium to large sized animal, the height needs to be increased. It is better if the enclosure is not lower than a meter. Otherwise, the pet will be able to jump over the wall, and the fence will be meaningless.

High pens are needed for large dogs, which are usually locked up to protect furniture and belongings from their claws and teeth. If you raise and train your dog, you won’t have to worry about your property. Then the enclosure will come in handy if the animal suddenly gets sick or when it is expecting offspring.

Note! Don't forget to leave room for games. On the territory of the enclosure there should be not only a sleeping place and bowls. If an animal is locked up for a long time, it needs space to move.

Rectangular enclosures are in great demand. This shape will easily fit into any room. When installing, you need to remember that there should be no battery or other heating or electrical devices nearby. It is not recommended to place the enclosure in the kitchen and bathroom.

Location in the apartment

Enclosure sizes

To make an aviary with your own hands, you will first need to decide on the size. It all depends on the breed, or rather, on the size of the dog. The larger it is, the more spacious the enclosure it needs for normal well-being. For shepherds, huskies and other not too large dogs, a pen with an area of ​​6 meters per individual is sufficient. For Alabais, Caucasian Shepherds, Mastiffs and other large breeds, much more is needed. If the pen is considered only for “locking it while someone comes,” then you can fence off the same 6 squares. Otherwise - at least 8

We assume that the depth of the pen is desirable to be at least 2 meters. The width “emerges” from the required area and the available free space.

Recommended enclosure area for large and medium dogs

Usually the enclosure is made covered. You can leave part of the area without a roof so that your pet can bask in the sun if desired. But you shouldn’t leave the area unprotected: either your dog will run away or someone will come to visit. Instead of a “normal” roof, there may be a lattice made of rods - there is enough light and there are no surprises to expect.

If the dog will spend the winter in the enclosure, you can provide a winter road or install an insulated booth. Most likely, your watchman will like the second option better. They often prefer to sit on the roof of the booth, since there is a better view from there, and not everyone agrees to go into the closed part - they can’t see anything. You can quickly stick your head out of the booth, but you have to run out of the winter road. In general, you better know your pet's personality. An enclosure is not always built because it is cheaper, but so that it is durable, reliable and comfortable for the animal.

DIY dog enclosure

Despite the huge selection of enclosures, many dog ​​owners make their own cages for their beloved pets. This way you can take into account the wishes of all family members and ideally fit the indoor booth into the interior. It is important to take into account the size of the dog, assessing how much space it needs to spend time comfortably. For example, it is not difficult to make an enclosure for a Spitz or a Chihuahua in an apartment with your own hands. Representatives of these breeds are small, so there is no need to build too large a fence.

To make a cage or enclosure for dogs, you will need:

• material to assemble the frame;
• wire;
• metal grid. Chainlink should not be used, as the cells are highly mobile, which can lead to injury to the pet;
• pliers;
• awnings with fastenings;
• loops;
• locks.

The frame is usually made of metal or wooden beams. In the first case, they can be twisted together with wire or welded, which will be much more reliable. Wooden parts are nailed together. You can connect them with self-tapping screws and special mounting angles. The result should be a parallelepiped. Next, you need to stretch the mesh; it serves as walls, floor, and, if necessary, roof. You need to leave space under the door, that is, do not tighten one side.

Note! You need to put plywood on the floor and cover it with a soft cloth to make your pet warm and comfortable. Lying on a wooden surface is extremely uncomfortable; the dog is unlikely to love his booth.

Canopies are used to secure the door. A lock is installed on its other side. The door will need hinges to close.

Instead of metal mesh, you can take wooden bars. They are made into something like a fence, attached to the assembled frame. Leave a small distance between the slats or place them closely. If a whole board or sheet of plywood is screwed to a wooden frame, completely covering the wall, then it is better to make a window in it, especially if the booth is planned to have a roof. The resulting hole can be covered with a metal mesh.

Types of fencing

Of course, you can build an enclosure with your own hands. However, today there are many types for both very large and small-sized dogs, which can be ordered from manufacturing companies specializing in this area. Such structures, mostly prefabricated frame ones, are installed within one hour and have affordable prices.

Photo: open made of wood

Photo: closed made of metal

It is important to know that when building this enclosure, you should definitely take into account the existing recommendations of experts, for example, regarding the best floor covering for the location, the type of doors, the method of opening, etc.

Since enclosures are different, their prices can also vary greatly. The average price assembled from metal mesh is 20,000 rubles. Depending on the type of construction and materials used, prices can vary greatly. To choose the best option, you need to familiarize yourself with the company’s catalog offerings and discuss all the details with a company consultant.

Comfortable enclosure

The enclosure should contain more than just the animal’s bedding and bowls. It is important that there is room for free movement and play. The dog should feel comfortable, it is bad when a limited space restricts its movements.

Note! It is better that bowls, especially those with water, are attached to the wall. By running and jumping, the dog can knock them over and stain everything around.

Bowls are secured in a spacious enclosure

How to accustom an animal to an enclosure

The animal must be accustomed to the enclosure gradually. First, just open the door and show the playpen to the dog, let him know about its existence and understand that he can enter there. Then, during the game, throw your pet’s toy there and ask him to bring it. When the dog completes the task, you must praise him.

Important! Under no circumstances should you scold an animal if it refuses to obey, or force the dog every day to be in the enclosure, to which it will gradually become accustomed.

You can go in there with your dog and spend some time and then close the door. For the first time, it is enough if the dog spends about 5 minutes there. The main thing is that she doesn’t get scared. Rush in training will only alert the animal and you will have to start all over again. Soon it will understand that it is safe in an indoor pen, and will remain there for as long as the owner needs.

An enclosure for a dog in an apartment should be equipped with comfort, because this is the pet’s room where he should spend time with pleasure. Therefore, you need to take care of choosing a place for the playpen and making sure that the dog is comfortable there.

Types of enclosures

Before you buy an enclosure, you need to understand that it will become a real home for your pet, so it is important to achieve maximum comfort. Typically, in the manufacture of such products, only those materials are used that do not pose a danger to the health of the animal.

There are two options for solving the problem - you can buy a ready-made enclosure or order its production.

Your pets are completely safe with us. Many years of experience working with animals speaks of our status and confidence. We have cured more than a thousand animals, and we continue to save the lives of our little brothers.

Diagnostics

Diagnostics – Modern high-tech equipment. Ultrasound, ECG, ECHO, endoscopy, tests.

therapy

Timely treatment of diseases, emergency care for animals in emergency situations.

surgery

All types of operations: from cupping to treatment of injuries and diseases of organs. Treatment of oral cavities.

vaccination

Prevention of disease in pets.

About Us

Our veterinary clinic is modern, cozy and technically equipped, located in Rostov-on-Don, specializing in providing a wide range of services for pets. Certified specialists of the Radan veterinary clinic have many years of experience in the field of veterinary medicine, constantly improve their skills in the profession, undergo internships, and attend specialized conferences. The equipment of our veterinary clinic allows us to provide a wide range of diagnostic services. Laboratory examination of urine, blood, feces; electrocardiography, ultrasound diagnostics, radiology, microscopy for skin problems, testing for infectious diseases - and this is an incomplete list of diagnostic services that we provide in our veterinary clinic. “Why do you need an enclosure for a dog in Rostov-on-Don” - your solution is here. The Radan Veterinary Clinic provides vaccinations and state registration of your pets. We also provide microchipping for pets. We understand that the services of a veterinary clinic should not only be of high quality, professional and practical, but also accessible to a wide range of pet owners. To achieve this, our veterinary clinic constantly holds promotions that allow you to receive quality services at an attractive price.